Steel Best-In-Class 7.5 Ton

Steel Best-In-Class 7.5 Ton

Engineered and built to bring you serious relentless performance round after round, Jerr-Dan's 7.5 Ton BIC carrier is a heavyweight delivering 22', 24' 26' or 28' of deck, plenty of best-in-class features, and a 15,000 lbs. capacity. Loading and unloading angles are extremely low because this carrier has a full 11' of slide cylinder stroke. This gives you the flexibility to handle mid-size loads as well as regular cars. The Steel Best-In-Class 7.5 Ton from Jerr-Dan features:    

 

Top 5 Reasons

Download Brochure (PDF)
Adobe Acrobat Reader is required to read any PDF document. Click here to get the
free version of Adobe Acrobat Reader.

Body
  • Dual Lighted Control Stations with Durable Polycarbonate Placards, Polyethylene Hoods and No-Lube Polished Aluminum Handles
  • Robotically Welded Reinforced Rigid Tubular Steel Subframe
  • No Lube High Performance Replaceable Slide Pad System
  • No-Lube Pivot Joint Technology Utilizing Composite Bearings and Hardened Plated Pins
  • Flexible Nylon Carrier Tracking System for Hydraulic Hoses and Wiring Harness
  • Adjustable Tilt Stabilizer Bumpers
Deck
  • 36 KSI, 3/16" Diamond Steel Decking
  • Formed Steel Crossmembers on 12" Centers
  • W6 x 16 lb/ft Steel Main Deck Beams
  • Reinforced Low-Profile Tapered Approach Tip
  • Steel Angle Flush Style Rubrails with Stake Pockets on 24" Centers
  • 6" High Removable Sectional Steel Tubular Raised Rails
  • Two Chain and Binder Trays Abreast of Winch
  • Heavy Duty Deck Lock / Hold Down System
Headboard
  • Standard Full Height Bolt-On Steel Headboard Pre-Wired for Lightbar and Work Lights
Hydraulics
  • Dual Hydraulic Counterbalance Locking Valve on Deck Tilt Function
  • Abrasion Resistant / Thermal Resistant Hydraulic Hoses
  • Externally Mounted 12 Gallon Hydraulic Reservoir with Integrated Oil Level / Temperature Gauge, Magnetic Clean-Out Provision and Replacable 150 Micron Suction Stainier
  • 10 Micron In-Line Replaceable Return Filter with Service Indicator Gauge
  • Dual Outboard Tilt Cylinders and Single Roll Cylinder with Chrome Plated Rods
  • System Pressure Gauge Mounted in Driver Side Control Station
  • System Overload Protection Factory set to 2,500 psi
Lighting
  • LED Stop/Tail/Turn and Marker Lights
  • FMVSS 108 Light Group Utilizing Weather Resistant Harnesses and Connectors
  • Back-Up Lights (pair)
Misc.
  • Back-Up Alarm
  • Jerr-Dan Mud Flaps
  • Rear of Subframe License Plate Holder
Paint
  • Deck, Headboard, Removable Rails and Subframe Painted Black
PTO
  • Direct Mount Pump - 11 gpm @ 1,000 rpm
Tie-Downs
  • Keyslots: Two at Front, Two at Mid, Four at Rear
  • V-Chain with Cluster Hooks
  • Tie-Down Chain and Strap Package
Winch
  • 10,000 lb High Speed Worm Gear Winch
  • Manual Operated Remote Winch Free Spool
  • 7/16" Dia x 56' Long (6 x 25 IWRC RRL EIPS) Winch Cable
  • Combination Winch Cable Roller Guide / Tensioner Plate



**The Tow Rating of your Recovery Equipment is limited to the actual GVWR (Gross Vehicle Weight), Rating of your Recovery Vehicle, or the Capacity of the Equipment used. For Example, the GVWR of your Recovery Vehicle should not be exceeded by the GCW (Gross Combined Weight) of both Towing and Towed Vehicles. This is the Actual Weight of the Towing Vehicle plus the Towed Vehicle(s) including: payload, driver, passenger(s), and fuel. (Everything that moves with your recovery vehicle). However, if the towed vehicle has independent braking activated from the towing vehicle, the the combined weight towed, will be the weight of the towing vehicle plus the lifted weight of the towed vehicle, which combined should not exceed the GVWR, or the GAWR of the rear axle of the towing vehicle, or the capacity of the equipment used.

Important Notice: All outside Frame Rails extending behind the cab of the chassis must be free of all Air Tanks, Battery Boxes, Fuel Tanks, Etc. All ratings comply with SAE J2512 Recommended Practice

Patents: 5,782,596 & 5,839,775 and Other Patents Pending

The load-carrying capacity of any truck is determined by the GVWR of the cab chassis. It is important that you determine that your truck has satisfactory carrying capacity and axle ratings for your specific application. Jerr-Dan's® authorized sales representatives are available to assist you in this regard. Specifications subject to change without prior notification. Some equipment shown may be optional.

Home | About Us | News | Customer Service | Jerr-Dan Life | Distributor's Login | Contact Us | Privacy Policy | Site Map

Wreckers | Carriers | Jerr-Dan Advantage | Tow Trucks | Heavy-Duty Tow Trucks | Rollbacks

© Jerr-Dan® Corporation, An Oshkosh Corporation Company. All Rights Reserved.